Customer Setup; FactoryService/Customer Menu - WMF Presto Service Manual

WMF presto Service Manual
1 Customer setup
Condition
Machine is reset to customer setup
Display-guided setup according to brief instructions.

Check correct setting of water hardness or descaling
filter and range of descaling filter.
If necessary update software to latest version (laptop

program KonfigTool required)
Adjust boiler temperature and beverages according to

customer specifications
(Customer Settings

beverage data or KonfigTool

Enter service point (KonfigTool required)

Store data in service memory (service program

machine data
 
Backup machine data in laptop memory

After setup, the service technician must note the
following statement in the assembly invoice:
"At the end of operation, had to be turned off at source.
The user manual and accessories were given to the
customer."
The customer must acknowledge this by his signature.
4
recipes/buttons, service program

beverage data)

standards customer

Reset automatic customer setup. Reset automatic customer setup.
See general information See general information
in the training manual in the training manual
Part 5 Service Part 5 Service
Service)

WMF presto Service manual edition 08/2007