Submenu Standards FactoryService/Customer - WMF Presto Service Manual

WMF presto Service Manual
3.8 submenu standards
factory service/customer

After tapping "self-detect" is first run automatically. All
components operating on 4 V or 30 V are automatically
addressed. The components are automatically identified.
During self-detect the grounds container must be in
place, the adjustable screen closed or the 4/30 V circuits
of the components are interrupted.
Factory service/customer menu 1

Configuration of grinders is registered automatically (see
chapter portioner).
Configuration of powder portioner is registered
automatically (see chapter portioner).
Steam boiler is registered automatically by its intake valve
(See chapter boiler

Factory service/customer menu 2

Steam dispensing valve is automatically detected
(See chapter boiler

Milk is automatically detected
(See chapter boiler

Aquaflex The machine can be operated as fresh water or
water tank version by the customer. This option can only
be set if water tank was detected as "no".
10
Configuration of grinders
Configuration of powder portioner
Steam boiler existent
water system).
Steam dispensing valve existent
Fresh milk valve (cappuccino valve) existent
Aquaflex
water system)
water system)
See chapter engineering, portioner See chapter engineering, portioner
in the training manual in the training manual
See chapter engineering, See chapter engineering,
boiler/steam boiler boiler/steam boiler
in the training manual in the training manual
Part 2 Engineering Part 2 Engineering
See chapter Boiler water systems See chapter Boiler water systems
in the training manual in the training manual
Part 2 Engineering Part 2 Engineering
WMF presto Service manual edition 08/2007