MaxStream XTend-PKG-R RS-232 RF Quick Start Manual

Table of Contents

Download this manual

Quick Start Guide

XTend-PKG-R™ RS-232/485 RF Modem

Introduction

Range Test Setup

Range Test Procedure

Optional Configurations

Create a Long Range Wireless Link In Minutes.

www.maxstream.net

WARNING: When operating with 1 Watt power output, transmitting in close

proximity of other RF modems can damage modem front-ends. Observe a

minimum separation distance of 2' (0.6 m) between RF modems.

MD0019

Table of Contents

Do you have a question about the XTend-PKG-R RS-232 RF and is the answer not in the manual?

Page 1: Quick Start Guide
Optional Configurations Create a Long Range Wireless Link In Minutes. www.maxstream.net © 2005 MaxStream, Inc. All rights reserved. MD0019 WARNING: When operating with 1 Watt power output, transmitting in close proximity of other RF modems can damage modem front-ends. Observe a...
Page 2: Hardware Setup
Install X-CTU Software: Double-click "setup_X-CTU.exe" file and follow prompts of the installation screens. This file is located on the MaxStream CD and also on the following web page: www.maxstream.net/helpdesk/download.php The X-CTU software interface is divided into the four following tabs: •...
Page 3 Determine RF modem's range [steps 1-8 of "Range Test"]. Range Test 1. Launch the X-CTU Software: (Start --> Programs --> MaxStream --> X-CTU) Under the "PC Settings" tab [Figure 2], select the PC serial com port from the dropdown list that will be used to connect to Radio1.
Page 4: Optional Configurations
X-CTU Software "Terminal" and "Modem Configuration" tabs. Binary programming is also supported. Refer to the XTend-PKG-R RF Modem product manual for more information about the available configuration options. Contact MaxStream (Office hours are 8am – 5pm U.S. Mountain Standard Time) Phone: (801) 765-9885, Live Chat: www.maxstream.net, E-Mail: rf-xperts@maxstream.net...

Xtend-pkg-r rs-485 rf