Vivax ACP-09CH25ZNM Service Manual page 6

INSTALLATION
1
Securing the mounting plate and drill on the wall
Secure the mounting plate
The mounting plate should be attached to the structural part of wall (post etc).
fasten string at the central hole
The holes at solid arrow position must be secured to avoid the shake of mounting plate.
NOTICE:
When the expansion bolts are used, two holes ( 11 20 or 11 26 ) that the distance
between them is 450mm should be adopted.
Drill on the wall
fasten string at the central hole
NOTICE:
Confirm the position of holes, and drill holes on the wall.
fasten string at the central hole at least 250mm
at least 140mm
Center of hole( 65mm)
NOTICE:
The holes at solid arrow position must be secured to avoid the shake of mounting plate.
When the expansion bolts are used, two holes ( 11 20 or 11 26 ) that the distance
between them is 450mm should be adopted.
Confirm the position of holes, and drill holes on the wall.
mounting plate
Tapping screw
ST4 25(5)
plumb
plumb
at least 180mm
Pipe hole
plumb
Center of hole( 65mm)
120mm
Fasten string at the central hole
Tapping screw
ST4 25(5)
105mm
45mm
Center of hole( 65mm)
at least 120mm
90mm
4
plumb
mounting plate
40mm
Center of hole( 65mm)
fasten string at the central hole
440mm 440mm
plumb
at least250mm
at least 120mm
90mm
Pipe hole