TPG HG532D Configuration Manual

Modem Configuration Guide

HG532D

Configuring in Layer2 PPPoE for Mac OS X

IMPORTANT MESSAGE

Your modem has been pre-configured, you do not need to follow each step of the set-up guide but should retain this

document in case you need to manually configure your equipment.

To configure your PC/Laptop with your wireless password including changing your wireless password, please

proceed to step 3.

Contents

1. Physical Connection

1. PHYSICAL CONNECTION

Ensure your modem is powered on. These instructions assume you are connecting via wireless.

2. CONFIGURING INTERNET

A. Open your browser and in the address bar type http://192.168.1.1 and press Enter

B. Enter admin for both the username and password and click Login. If you have changed the default login and

password then please enter the new username and password

HG532D

Table of Contents

Do you have a question about the HG532D and is the answer not in the manual?

Page 1 Modem Configuration Guide HG532D HG532D Configuring in Layer2 PPPoE for Mac OS X IMPORTANT MESSAGE Your modem has been pre-configured, you do not need to follow each step of the set-up guide but should retain this document in case you need to manually configure your equipment.
Page 2 Things you need to know before you begin: By default the modem your TPG modem is configured with the following wireless security settings: SSID (name for the wireless connection): TPG-xxxx (xxxx is a random 4 digit alphanumeric code printed on the sticker underneath your modem)
Page 3 PLEASE NOTE: Each time your router is powered on, it will initialize this automated authentication process after which your router will receive a public IP address (fixed or dynamic depending on your plan) and DNS settings from TPG. tpg.com.au/support 13 14 23...