Advertisement
Quick Links
Advertisement
Related Manuals for TPG WiFi Cube 3 4G
Summary of Contents for TPG WiFi Cube 3 4G
- Page 1 Home Wireless Broadband Quick Installation Guide WiFi Cube 3 4G modem...
-
Page 2: Before You Get Started
Before you get started 1. Make sure you have an email or SMS from us advising you to plug in your new modem. 2. Unplug your old broadband modem - this will ensure that all your devices are connected to your new modem. - Page 3 Get to know your modem's lights Light Icon State Meaning Modem is connected to the 4G mobile network. Colour indicates signal strength. (Green = Strong; Yellow = Moderate/weak; = No connection) Modem is not connected to the 4G mobile network. WiFi 2.4GHz/5GHz WiFi network is enabled.
- Page 4 Set up Home Wireless Please note: The Home Wireless SIM card will not work in any other device and must not be removed from the modem. Internet connections via the LAN2/WAN port are not supported. MAIN Modem plugged into wall socket LAN1 Nano SIM Card RESET...
- Page 5 Set up Home Wireless Your TPG Nano SIM card has already been inserted and activated for your convenience. Please do not remove it from the modem. Place the modem in a clear space near a window, avoiding direct sunlight. Placing the modem on the floor or in a cupboard may cause a weak signal.
- Page 6 Connecting to WiFi It’s easiest to connect your devices using your modem’s default WiFi network name (SSID) and password – once connected, your devices will remember the WiFi password for you. You’ll find the default WiFi network name (SSID) and password on the barcode sticker located on the base of your modem.
- Page 7 Customise your WiFi settings If you’d prefer to customise your WiFi network settings, you can do so using a device connected to your modem via WiFi or Ethernet cable. Open your web browser and log in at http://192.168.8.1 with the unique default password found on your modem's barcode sticker.
-
Page 8: Warranty Information
• Phone: 13 14 23 an external event (for example a fire or flood). • Email: helpdesk@tpg.com.au If on inspection of the returned equipment we determine that the fault was caused by a Non Covered Event, you will be charged for... - Page 9 1.10 This warranty is given by TPG Internet Pty Ltd (ABN 15 068 383 737). You can contact us on 13 14 23 or via email to helpdesk@tpg.com.au if you have any questions regarding this warranty.
-
Page 10: Safety Information
Safety Information • Device is for indoor use only. • For medical devices, please consult your physician and the device manufacturer to determine if operation of your device may interfere • Keep the device away from water, fire, humidity or hot environments. with the operation of your medical device. - Page 11 Safety Information RF Exposure Information This device transmits and receives radio information using unlicensed Wi-Fi spectrum. This device meets the Radio communications (Electromagnetics Radiation – Human Exposure) Standard 2014, Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) Standard RPS3:2002 revised 2016 and AS/NZS 2772.2:2016 on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
- Page 12 For More Information Moving House? TPG Community: https://community.tpg.com.au Don’t leave your broadband behind! Technical Support: helpdesk@tpg.com.au Call our Moving Home team on 1300 865 124 Customer Service: customer_service@tpg.com.au Online: www.tpg.com.au/support Call: 1300 994 533...
Need help?
Do you have a question about the WiFi Cube 3 4G and is the answer not in the manual?
Questions and answers