Download Print this page

TPG Netgear Nighthawk D7800 Setup Manual

Netgear Nighthawk D7800

Please follow the steps below to set up your Netgear Nighthawk D7800.

1. Ensure your NBN Connection Box is turned on.

2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into the red

Internet port on your Nighthawk modem.

If UNI-D1 doesn't work, try each UNI-D port.

3. Plug in the power cable and turn your Nighthawk modem on using the Power button.

4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging

Ethernet cables from the device to any of the four yellow LAN ports, or you can connect

devices via WiFi.

5. Go to

http://192.168.0.1

Modem Setup Guide – NBN FTTP

http://www.routerlogin.net

in your browser.

Table of Contents

Need help?

Do you have a question about the Netgear Nighthawk D7800 and is the answer not in the manual?

Page 1 Modem Setup Guide – NBN FTTP Netgear Nighthawk D7800 Please follow the steps below to set up your Netgear Nighthawk D7800. 1. Ensure your NBN Connection Box is turned on. 2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into the red Internet port on your Nighthawk modem.
Page 2 19. Leave the other settings as they are and click Apply. Once you receive notification that your TPG NBN service is active, your Nighthawk D7800 should now be online. If you are still having issues, please call us on 1300 997 271 for...