Table of Contents
Advertisement
Quick Links
D-Link DSL-2878
Please follow the steps below to set up your D-Link DSL-2878.
1. Ensure your NBN Connection Box is turned on.
2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into the
yellow LAN/WAN port on your D-Link modem.
If UNI-D1 doesn't work, try each UNI-D port.
3. Plug in the power cable and turn your D-Link modem on using the Power button on the
side.
4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to any of the remaining three yellow LAN ports, or you
can connect devices via WiFi.
5. Go to http://192.168.1.1 in your browser.
6. Log in with your D-Link modem password (if this was not changed, the default password
printed on a label on the back of your modem).
Modem Setup Guide – NBN FTTP
1
Advertisement
Table of Contents
Related Manuals for TPG D-Link DSL-2878
Summary of Contents for TPG D-Link DSL-2878
- Page 1 Modem Setup Guide – NBN FTTP D-Link DSL-2878 Please follow the steps below to set up your D-Link DSL-2878. 1. Ensure your NBN Connection Box is turned on. 2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into the yellow LAN/WAN port on your D-Link modem.
- Page 2 11. Enter your TPG username and password. 12. Click Save. Once you receive notification that your TPG NBN service is active, your D-Link DSL-2878 should now be online. If you are still having issues, please call us on 1300 997 271 for...
Need help?
Do you have a question about the D-Link DSL-2878 and is the answer not in the manual?
Questions and answers