How To Install The Unit On Your Bicycle; Attach The Bracket To The Stem Or Handlebar; Remove/Install The Computer - Cateye CC-RD430DW User Manual

How to install the unit on your bicycle

1
Bracket Dial
Bracket
band
1

Attach the bracket to the stem or handlebar

The FlexTight™ bracket can be attached to either the stem or the handlebar, depending on how the bracket fits into the bracket band.
Caution Be sure to tighten the dial of the FlexTight™ bracket by hand.
Tightening it strongly using a tool, etc. may damage the screw thread.
When attaching the FlexTight™ bracket to the stem :
When attaching the FlexTight™ bracket to the handlebar :
* To mount the bracket to an aero-shaped handlebar or larger stem, use the optional nylon ties bracket.
Bracket
rubber pad

Remove/Install the computer

Bracket band Bracket rubber pad
Bracket
Bracket band Bracket rubber pad
Bracket
Click
CC-RD430DW
Stem
Handlebar
While supporting it by hand,
Push it out as if lifting the front up
2
ENG
Dial
Cut
Caution:
Round off the cut edge
of the bracket band to
prevent injury.