Operation For Bell Tv Users - Winegard SK-1000 Trav'ler Owner's Manual

Operation for Bell TV Users

1
WINEGARD COMPANY
POWER ON
Press and hold [POWER] for two
seconds or until the TRAV'LER interface
displays "POWER ON."
3
Enter User Menu?
*Yes No
Press and hold the [ENTER] button for
two seconds. The TRAV'LER interface
will ask if you wish to enter the User
Menu. Press [SELECT] to choose "Yes."
Then, press [ENTER].
5
Install Password
0000
The interface box will ask for a
password. Press [ENTER] four times to
enter code "0000" on the display.
7
LG Mount
SM Mount*
Press [SELECT] until the asterisk is next
to "SM Mount," and then press [ENTER].
9
SM ExpressVu*
Installation
Press [SELECT] until the asterisk is next
to "SM ExpressVu." Press [ENTER].
3
2
connecting to
antenna
Now that the power is on, release the
[POWER] button.
4
Installation*
Exit
The User Menu consists of four choices:
Search Mode, Diagnostics, Installation,
and Exit. Press [SELECT] until the
asterisk is next to "Installation," and then
press [ENTER].
6
Select Antenna*
Raise Antenna
Press [ENTER] to choose "Select Antenna."
8
SM Password
0022
Enter code "0022" by pressing [SELECT]
to increase each number. Press [ENTER].
10
SM ExpressVu
*Yes No
Press [SELECT] until the asterisk is next
to "Yes." Press [ENTER].
Operation
Operation for Bell TV Users
11
SM ExpressVu
Success
The TRAV'LER interface box will display
"in progress" and then "Success".
13
Exit*
Select Antenna
Press [SELECT] until the asterisk is next
to "Exit." Press [ENTER].
15
SM ExpressVu
Ready: Multi-Sat
The TRAV'LER interface box will try
to determine the type of dish that it is
working with. The TRAV'LER interface
will display the type of satellite dish on
the top line.
17
SM ExpressVu
Peaking...
The antenna will peak on a signal.
TIP
If you want to turn off the power to the TRAV'LER antenna after the antenna has locked onto satellites, press
[POWER] and [SELECT] at the same time. Before traveling, make sure to press
TRAV'LER antenna to stow. See page 6 for more information on stowing before traveling.
Operation
12
Installation*
SM DTV Triple
Press [ENTER] and then choose
[SELECT] until the asterisk is next to
"Installation." Press [ENTER].
14
Power Off?
Yes *No
The TRAV'LER interface box will ask if
you want to turn the power off. Select
"No" by pressing [ENTER].
16
SM ExpressVu
Searching...
The TRAV'LER antenna will enter the search
mode as part of its normal operation.
18
SM ExpressVu
*91 *82
The TRAV'LER antenna will lock onto two
different satellites. As the antenna finishes
searching, the antenna will display an
asterisk for each satellite found.
[POWER] and wait for the
4