Maintenance; Protecting The Environment; Service Information - Black & Decker G2207 Linea PRO Instruction Manual

20 • ENGLISH
f Always position the tool in such a way that the guard
provides optimum protection from the grinding
or cutting disc.
Switching on and off
f To switch the tool on, press the lock-off button (2)
and subsequently press the on/off switch (1).
f To switch the tool off, release the on/off switch (1).
Warning! Do not switch the tool off while under load.
Hints for optimum use
f Firmly hold the tool with one hand around the side
handle and the other hand around the main handle.
f When grinding, always maintain an angle of approx. 15°
between the disc and the workpiece surface.

MAINTENANCE

Your Black & Decker corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on
corded/cordless power tools:
f Switch off and unplug the appliance/tool.
f Or switch off and remove the battery from the
appliance/tool if the appliance/tool has a separate
battery pack.
f Or run the battery down completely if it is integral
and then switch off.
f Unplug the charger before cleaning it. Your charger
does not require any maintenance apart from regular
cleaning.
f Regularly clean the ventilation slots in your appliance/
tool/charger using a soft brush or dry cloth.
f Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
f Regularly open the chuck and tap it to remove
any dust from the interior (when fitted).

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com
SPECIFICATIONS G2207
Power 2200W
Disc diameter 7" (180mm)
Voltaje
AR 220V ~ 50Hz
B2C 220V ~ 50-60Hz
B3 120V ~ 60Hz
B2 220V ~ 60Hz
BR 127V ~ 60Hz
No-load speed 8400/min
Spindle size M14
Cable length 2,5m
G2209
2200W
9" (230mm)
220V ~ 50Hz
220V ~ 50-60Hz
120V ~ 60Hz
220V ~ 60Hz
127V ~ 60Hz
6500/min
M14
2,5m