Advertisement
ENGLISH
spindle lock (fig. 1)
The spindle lock (b) prevents the output shaft from
rotating when attaching or removing the grinding
wheel. Only use the spindle lock when the tool is
switched off, power is unplugged, and wheel stops
completely.
NOTE: To minimize tool damages, don't
use the spindle lock when the tool is
operating. Otherwise, it may damage
the tool. The attached accessories may
come off and cause injury.
If using the spindle lock, press the spindle lock
button and rotate the output shaft until it stops.
Application on metals
When applying the tool on metals, make sure that a
residual-current device (RCD) is inserted to prevent
danger from metal chips.
If the RCD causes power disconnection, have the
tool sent to an authorized Black & Decker dealer for
repair.
WARNING: Under extreme working
conditions, conductive dust and grit may
accumulate on the housing interior when
handling metal workpieces. This could
create an electric shock hazard as it
weakens the protective insulation in the
grinder.
To avoid accumulation of metal chips in the
interior of the grinder, we recommend cleaning the
ventilation ducts daily. Refer to Maintenance.
using grinding Wheels
WARNING: Metal powder
accumulates. Excessive use of the
grinding wheel on metals may increase
the risk of electric shock. To reduce the
risk, insert the RCD before use and clean
the ventilation ducts daily. Follow the
maintenance instructions below to blow
dry compressed air into the ventilation
ducts.
maintenance
Black & Decker power tools have been designed
to operate over a long period of time with minimal
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To minimize the danger
of serious personal injury, please
switch off the tool power and
9
disconnect all plugs before adjusting
or removing/installing any accessory.
Before reassembling the tool, press and
release the trigger switch to make sure
the tool is already switched off.
lubrication
This power tool does not require separate lubrication.
cleaning
WARNING: Once visible dust
accumulates on the ventilation ducts and
the surrounding, immediately use dry
air to blow away dust and grit out of the
interior of the housing. You need to wear
approved eye and facial protective gear
when performing this process.
WARNING: Never use solvents or harsh
chemicals to clean non-metal parts of the
tool. These chemicals may weaken the
material of the parts. Use only mild soap
and damp cloth to clean the tool. Never
let any liquid get inside the tool; never
immerse any part of the tool into liquid.
Accessories
WARNING: Excluding accessories
provided by Black & Decker, all other
accessories have not been tested
for product compatibility. Using such
accessories together with this tool may
cause safety hazards. To minimize the
risk of personal injury, we recommend
you to use only Black & Decker
accessories with this product.
Please inquire at your dealer for more information
regarding suitable accessories.
Protecting The environment
Sorting and Recycling. This product is
not to be disposed of with normal
household waste.
In the event that you need to replace your Black &
Decker product or if it is of no further use to you,
Advertisement
