Model A-9 Coffee Mill Operation - KitchenAid A-9 Instructions Manual

Model A-9
Before First Use
Wash the bean hopper, bean hopper
lid, and measuring glass in hot, soapy
water. Rinse and dry.
Model A-9 ® Coffee Mill Use
1. Unplug Coffee Mill.
2. Attach bean hopper to motor
housing by turning bean hopper
clockwise until snug.
3. Fill bean hopper with whole coffee
beans. Attach lid to bean hopper
by turning clockwise.
NOTE: Grinding flavoured coffee
beans is not recommended. Flavoured
beans will impart an off-taste to any
other coffee that is ground in the mill.
Additionally, many flavoured coffee
beans have sugars or syrups added in
the roasting process. These sugared
beans may cause the mill to clog,
damaging the unit.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these
instructions can result in
death, fire or electrical shock.
4. Plug into a grounded 3-prong outlet.
® Coffee Mill Operation
5. Select grind by rotating grind
adjustment ring, aligning markings
with the grind indicator arrow on
the motor housing. See "Coffee
Grinding Tips" on page 6 to select
the appropriate grind adjustment.
6. Position measuring glass under
spout. The glass shows the
approximate amount of coffee
needed to brew a given number of
cups. Individual tastes may require
slightly more or less coffee.
7. To grind coffee, flip "On/Off"
switch to "On" position. When
measuring glass is filled with
desired amount, flip "On/Off"
switch to "Off" position.
NOTE: To avoid grounds spraying
beyond glass, do not lift grind spout
cover while the coffee mill is operating.
5