Code Alarm CA 610 Owner's Manual page 11

CANCELING THE AUTOMATIC START TIMER:
To cancel the automatic start timer do one of the following:
1. Start the vehicle using the ignition key and depress the brake pedal.
2. Remote start & stop the vehicle using your keychain transmitter.
ADDITIONAL REMOTE FUNCTION CHANNEL 3:
The system has an additional feature, (Channel 3) ,that can be connected to
the Trunk Release. To operate the accessory associated with channel 3,
press and hold the trunk/key button of your keychain transmitter for four
seconds.
NOTE: The feature that has been added to channel 3 will always be operated
using the same transmitter button that controls the remote start system. There
is no way to move the channel 3 function to a different channel.
ADDITIONAL REMOTE FUNCTION CHANNEL 4:
The system has an additional feature, (Channel 4) ,that can be connected to a
number of different optional accessories. To operate the accessory
associated with channel 4, press and release the OPT button of your keychain
transmitter. Note: The channel 4 output will remain active for as long as the
transmitter button are held. Certain accessories may take advantage of the
extended output capability of this channel. Check with your installation center
for operation of the accessory that may be connected to channel 4.
128-6530
11 of 10