Table of Contents
Advertisement
Errors
Setting or Changing the Password
Clean the AIT drive. For information about how to clean the drive,
refer to "Cleaning the AIT Drive" (page 58) in Chapter 5, "Operating
the AIT Drive".
"Threshold Condition Met":
The specific part has operated more than the specified number of
times.
Since the specific part has reached the periodic exchange time,
contact the service and support center.
"Drive Information":
An error occurred in the AIT drive.
The warning messages are as follows:
Drive1 (or Drive2)
Xx
When an error occurs in the AIT library, an error code appears on the LCD
panel.
For information about error codes, refer to the "Error Code List" (page 88) in
the "Appendix" chapter.
Error
03010101
A password can be set on the AIT library. The password is used when accessing
certain menus via Ethernet.
This section explains the steps required to set or change the password from the
control panel.
The password is extremely important to the security of the library. Closely
guard the password.
Note
The password can also be set through a browser.
1
At the status display, press the [MENU] button for 0.5 second.
An error has occurred in the AIT drive.
This is an error code. Contact the nearest
Service Support Center.
12:34
39
Chapter 3 Basic Usage
Advertisement
Table of Contents
