Table of Contents
Advertisement
Setting the Bar Code
Setting the R-MIC Function
6
Press the [CANCEL] button twice to return to the status display.
In "Bar Code" of the Configuration Menu, configure the bar code settings so
that the bar code affixed to the cartridge can be read.
Note
The setting of the bar code can also be configured through a browser.
1
At the status display, press the [MENU] button for 0.5 second.
2
Press the V button once to select "2.Configuration", then press the
[ENTER] button.
3
Select "3.Bar Code", then press the
[ENTER] button.
"Bar Code" appears.
4
Use the V and v buttons to select "YES", then press the [ENTER] button.
The default factory setting is "YES".
Select "NO" to not read the bar code.
5
Press the [CANCEL] button twice to return to the status display.
In "R-MIC" of the Configuration Menu, enable the R-MIC function in order to
use the AIT-3 cartridge.
Notes
• When the AIT-2 cartridges or the AIT-1 cartridges are being used, the R-MIC
function does not need to be set.
• The R-MIC function can also be set through a browser.
1
At the status display, press the [MENU] button for 0.5 second.
2
Press the V button once to select "2.Configuration", then press the
[ENTER] button.
Configuration
1.Date & Time
2.Warnig
3.Bar Code
4.R-MIC
5.LCD Contrast
Bar Code
Enable
YES
Chapter 3 Basic Usage
12:34
12:34
42
Advertisement
Table of Contents
