Table of Contents
Advertisement
2
Place the library standing up so that the bottom is visible.
3
Remove the transport lock (1) and transport screw (2). To cover the holes,
affix the silver stickers provided on the positions marked by dotted lines in
the illustration below.
The transport lock (1) can be removed by turning it 90 degrees to the left
or right.
Remove the transport screw (2) by turning it counterclockwise.
• When you remove the transport lock and transport screw, cover the holes
with the silver stickers provided.
4
Attach the transport lock (1) and the transport screw (2) to the rear of the
library.
Bottom
90˚
90˚
(1)*
(2)*
(1)
(2)
14
Chapter 2 Installation
Advertisement
Table of Contents
