Table of Contents
Advertisement
Assigned Element Addresses
The "Configuration" page appears.
3
At "Key Operation", click "Disable" to select.
4
Click "Submit".
The library is configured.
Note
If the library power is turned off with the power switch on the rear panel, the
"Key Operation" setting is returned to "Enable".
An element is a physical location where a cartridge can be kept. Applications
use element addresses to differentiate between the elements of the AIT library.
In this library, the element addresses are assigned to the cartridge slots and the
AIT drives in the following manner.
45
Chapter 3 Basic Usage
Advertisement
Table of Contents
