Ccd Board And Mic; Removing The Ccd Board And Mic - Toshiba Satellite A300-ST3511 Maintenance Manual

4 Replacement Procedures

4.18 CCD Board and MIC

Removing the CCD Board and MIC

Remove the FL inverter board according to the following procedures and Figure 4-38.
1. Disconnect the CCD cable from the CCD module connector and remove the CCD
board.
MIC
2. Lift the MIC from the display rear cover.
4-58 Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300
CCD board
Figure 4-38 Removing the CCD board and MIC
4.18 CCD Board and MIC
CCD board cable
Maintenance Manual
0