ESI -50L Administrator's Manual page 22

ESI-50L Administrator's Manual
Function 373: View RFID tag number
This is used to display tag numbers that are associated to extensions or mailboxes. You can only view tag
numbers with this function. You cannot change any tag numbers or assignments.
Enter the station or mailbox number to display, and then press #. If there's an RFID tag number assigned to
that extension or mailbox, it will appear.
RFID TAG DISPLAY
EXT:
Tip: You can use ESI System Programmer or ESI System Administrator to print out a list of assigned
tag numbers.
Function 374: ESI Presence Management parameters
Playing prompts
This determines whether the system plays a prompt — and, if so, which one — when the ESI Presence
Management RFID Reader reads an electronic key. Select YES to enable playing of the prompt or NO to
disable playing of the prompt.
Default: YES (a prompt will play).
EPM RFID READER
PROMPTS: YES >
When this function is set to NO, no prompts will play through the ESI Presence Management RFID Reader.
When "EPM RFID Reader prompts" is set to YES, prompts will play as shown below. (These prompts can't
be customized.)
When the RFID Reader displays:
WELCOME
GOODBYE
ACCESS DENIED
LICENSE EXCEEDED
ERROR
READER FULL
Enable/disable sending time and attendance records
Notes: The NSP must be programmed and connected to a local area network for time and attendance
record collection.
Only ESI Presence Management RFID Readers programmed as type ENTRANCE/EXIT (Function 31)
generate time and attendance records.
This parameter is used when the optional ESI TimeLine time and attendance management software
application is used in conjunction with the ESI Presence Management RFID Reader.
Use the scroll keys to enable or disable time and attendance records, and press # to confirm.
Default: Disabled.
Function 4: Auto attendant programming
It plays this prompt:
"Welcome"
"Goodbye"
"Invalid Entry"
"Error"
"Error"
C.9