Wildview STC-WV40NG Instruction Manual page 9

3. Turn t he c amera t o t he O N p osition.
4. The camera will automatically switch to external power when it is
connected, e ven i f t he i nternal b atteries a re i nstalled.
NOTE: P lease m ake s ure t he v oltage a nd p olarity ( +/-­‐) a re c orrect b efore
connection. Incorrect voltage or polarity (+/-­‐) will damage the camera.
When both internal and external batteries are connected, the camera
will d raw p ower f rom t he h igher v oltage s ource f irst.
Memory O ptions
The camera is also equipped with an expandable media card slot capable of
accepting up to 32GB SD card w (sold separately). With no memory card
inserted into the slot, the camera will use the built in SDRAM memory to
store images. If an SD card is inserted into the slot, then the camera will
bypass the built in memory and utilize the SD memory. The front counter
display will show the number of images in the built in memory, unless the
expansion card is inserted at which point the front counter will only display
the n umber o f i mages s tored i n t he e xpansion c ard.
IMPORTANT SD CARD NOTICE
known good SD card from a reputable brand (including Stealth Cam memory
cards.) B eware of "low cost" memory cards often sold on discount websites such as
eBay as they could be manufactured to poor standards. Use of a low quality memory
card could result in camera lock up and / or shut down, v ideo corruption issues or
premature b attery d rain.
www.wildviewcam.com
Toll F ree 8 77-­‐269-­‐8490
: W ildview recommends that you use a
9