Related Manuals for Wildview Xtreme 3
Summary of Contents for Wildview Xtreme 3
- Page 1 STC-TGL3M User’s Manual Toll Free Customer Support 1-888-304-6125 www.wildviewcam.com Version 1.1 08/06...
- Page 2 Grand Prairie, Texas 75053-5189 www.wildviewcam.com Wildview Scouting Camera Limited Warranty Your Wildview Scouting Camera is covered by a One Year Limited Warranty on parts & labor from the date of purchase. The warranty covers defects in workmanship & materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally.
-
Page 3: Table Of Contents
STC-TGL3M Manual Contents Camera overview Camera kit contents Battery and memory Installation Definition Programming Mounting the camera Viewing images Saving and Deleting images Memory compatibility chart Technical Specs General Information www.wildviewcam.com Toll Free 888-304-6125... -
Page 4: Camera Overview
STC-TGL3M Camera overview Front view Side view www.wildviewcam.com Toll Free 888-304-6125... - Page 5 STC-TGL3M Open view image with major parts indication www.wildviewcam.com Toll Free 888-304-6125...
- Page 6 STC-TGL3M Image Capacity Chart SD card High Built In 32MB SDRAM 16MB 32MB 64MB 128MB 256MB 512MB 1GB* 1664 2GB* 1280 3328 1024 * Subject to card compatibility under different brand NOTE: Picture / Image Capacity Chart provides approximate www.wildviewcam.com Toll Free 888-304-6125...
-
Page 7: Camera Kit Contents
STC-TGL3M number of images or AVI movies based on resolution setting and the size of memory card. These figures may vary depending on the amount of detail in the image. Camera kit contents • Model STC-TGL3M Digital Scouting Camera • Camera driver •... -
Page 8: Battery And Memory Installation
Doing so will damage the camera and will void the warranty. The Wildview STC-TGL3M Digital Scouting Camera is designed to operate using alkaline batteries for optimum performance. NOTE: Always have camera in OFF position when installing or removing batteries. - Page 9 (sold separately). Battery cable and complete 12V Lead Acid battery kits are available wherever Wildview scouting cameras are sold or call toll free 888-304-6125. Only Wildview external battery accessories are recommended.
- Page 10 STC-TGL3M Memory Options Your Wildview scouting camera is equipped with 32MB built in SDRAM memory. The camera is also equipped with an expandable media card slot capable accepting up to 2GB* SD card (sold separately). With no memory card inserted into the slot, the camera will use the built in 32MB SDRAM memory.
-
Page 11: Definition
STC-TGL3M • To remove the SD memory card, depress the SD card and pull out the card gently. SD cards must be clean (no images from other sources.) Definition • Time out: To set the amount of preset time in minutes the camera will sleep between PIR triggering •... - Page 12 STC-TGL3M • Burst: To set number of picture the camera will take per PIR triggering 1P: Single image capturing per PIR triggering 2P: Two images continuous capturing per PIR triggering 3P: Three images continuous capturing per PIR triggering AVI: 10 seconds video clip per PIR triggering •...
-
Page 13: Programming
STC-TGL3M Programming your Wildview Camera The following setting must be performed before you turn on the camera. 1. Select the time out interval by sliding the time out toggle switch to the desire preset time interval in minutes. 1 / 5 / 10 / 20 minutes. - Page 14 STC-TGL3M 5. Turn on the Camera to set the Date / Time stamp a. Slide the power switch to PIR position b. Press and hold [SET] button for 2 seconds to enter date & time setting mode. c. Time and HH will blink. Press [UP] or [DN] to adjust hour d.
- Page 15 STC-TGL3M h. Press and hold [SET] button for 2 seconds to exit the setting mode and into PIR count down mode. Display will show date and number of picture taken. Once the program setting has been completed, slide the power switch to OFF position until you are ready for field use.
-
Page 16: Mounting The Camera
STC-TGL3M Mounting the camera It is recommended to mount the camera 4-5 ft off the ground with the camera pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west as the rising and setting of the sun could produce false triggers and overexposed images. - Page 17 STC-TGL3M Mounting the camera with the supplied strap • Insert the strap through the strap slots on the rear housing. • Wrap the strap around the mounting surface. Secure the strap and tighten the buckle in order to secure the camera.
- Page 18 Testing the camera coverage area One of Wildview Scouting Camera’s features is the ability to test the coverage area. • After mounting the camera, open front housing and slide the power switch to Test position.
- Page 19 STC-TGL3M • When you have completed the testing the coverage area open the front housing and slide the power switch from Test position to PIR position. Front LCD counter will show “0000”. The camera will enter count down mode for 1 minute and front green indicator will start blinking giving you one minute to leave the coverage area.
-
Page 20: Viewing Images
STC-TGL3M Viewing images Viewing images by computer download The Wildview Scouting Camera is a plug and play USB storage device. This means users of Windows 2000 /ME / and XP operating system need not install the camera driver. This camera is not MAC compatible. The CD-ROM included in this package contains the camera driver for older operating system only. - Page 21 STC-TGL3M • Follow the instructions shown on screen from your PC to completely install the driver and application program. • If the existing DirectX version on your PC is lower than version 8, and if you have problem viewing the image with the standard software provided by Microsoft, then you should install DirectX 8 •...
- Page 22 STC-TGL3M • If your computer doesn’t run automatically, please click “Start” button and choose “Run”, and then browse the CD drive and click “Setup”. Viewing the images on your computer • Slide the power switch to OFF location. • To view the images simply plug one end of the USB cable into an available USB port on your computer.
-
Page 23: Saving And Deleting Images
STC-TGL3M Saving and Deleting images SAVING IMAGES To save images on to your PC, simply copy and paste, or drag and drop from the SDRAM memory to your PC desk top. DELETING IMAGES There are two ways to delete the images from the internal SDRAM memory. - Page 24 STC-TGL3M or [DN] until screen shows “ESC” then press [SET] again to exit. d. This will only delete the last image saved in the memory. Delete All picture: a. Press [SET] button to enter delete setting. Display will show “ESC” b.
- Page 25 STC-TGL3M ESC: To exit delete setting. 2. Simply remove the battery from the battery compartment. This will delete the image stored in the internal SDRAM memory CAUTION: Do not remove the battery until you have down loaded all the images in the internal SDRAM. Once the battery is removed, all images in the internal SDRAM will be deleted.
-
Page 26: Memory Compatibility Chart
STC-TGL3M SD Compatibility Chart The following cards have been tested and approved for use in the Wildview STC-TGL3M model. 32MB, 64MB, 128MB, 256MB, 512MB San Disk 32MB, 64MB, 128MB Panasonic 32MB, 64MB, 128MB, Toshiba 32MB, 64MB, 128MB, 256MB, 512MB King Mate... -
Page 27: Technical Specs
STC-TGL3M Technical Specifications System Requirements and Compatibility • Windows 98/98se/2000/Me/XP. • Pentium III 450MHz or equivalent processor. • 128MB SDRAM or above. • VGA Video Card with 32MB RAM for minimum, Color 16 bit or higher. • An available CDROM driver and an available USB Port. - Page 28 STC-TGL3M Camera Features and Specification. • Image sensor: 3.0 mega-pixels Color CMOS • Built in 32MB SDRAM memories for image storage. • External memory support: SD memory card up to 2.0GB. • Resolution Options: 3.1M / 1.3M / QVGA (Video) •...
- Page 29 STC-TGL3M • PIR detection angle 48 deg • Low power consumption: Standby current: < 4mA Capture current <120mA • Interface type: USB 1.0 • Power: C size alkaline Batteries x 4. • Image format: Standard JPEG. And Motion JPEG (AVI) www.wildviewcam.com Toll Free 888-304-6125...
-
Page 30: General Information
Keep the Wildview scouting camera in a dry and cool dust-free environment or container when it is NOT used. • Take the batteries out, when the Wildview scouting camera is NOT to be used over a long period. www.wildviewcam.com Toll Free 888-304-6125... - Page 31 STC-TGL3M • Avoid dropping the Wildview scouting camera on to hard ground. Do not disassemble the Wildview scouting camera. • Do not mix new and old batteries. • Do not open the camera for unauthorized service. This could cause serious damage to the unit and will void the warranty.