Related Manuals for Wildview STC-TGL1
Summary of Contents for Wildview STC-TGL1
- Page 1 STC-TGL1 User’s Manual Toll Free Customer Support 1-888-304-6125 www.wildviewcam.com Version 1.2 08/06...
- Page 2 Grand Prairie, TX 75053-5189 www.wildviewcam.com Wildview Scouting Camera Limited Warranty Your Wildview Scouting Camera is covered by a One Year Limited Warranty on parts & labor from the date of purchase. The warranty covers defects in workmanship & materials. The warranty does not apply to units, which have been damaged or abused intentionally or unintentionally.
-
Page 3: Table Of Contents
STC-TGL1 Manual Contents Camera overview Camera kit contents Battery and memory Installation Set up & Using the camera Mounting the camera Viewing images Saving and Deleting images Memory compatibility chart Technical Specs General Information www.wildviewcam.com Toll Free 888-304-6125... -
Page 4: Camera Overview
STC-TGL1 Camera overview Front view Side view www.wildviewcam.com Toll Free 888-304-6125... - Page 5 STC-TGL1 Open view image with major parts indication www.wildviewcam.com Toll Free 888-304-6125...
- Page 6 STC-TGL1 Picture / Image Capacity QVGA SD card 300K Pixel 76K Pixel 16MB 32MB 1060 64MB 2,120 128MB 1,040 4,240 256MB 2,080 8,480 512MB 4,160 16,960 NOTE: Picture / Image Capacity Chart provides approximate number of images or AVI movies based on resolution setting and the size of memory card.
-
Page 7: Camera Kit Contents
STC-TGL1 Camera kit contents • Model STC-TGL1 VGA Digital Scouting Camera • CDROM (Contains camera driver only) • User Manual. • 1.5M USB cable. • Strap. www.wildviewcam.com Toll Free 888-304-6125... -
Page 8: Battery And Memory Installation
STC-TGL1 Battery & memory installation The Wildview STC-TGL1 VGA Digital Scouting Camera is designed to operate using alkaline batteries. NOTE: Always have camera in OFF position when installing or removing batteries. Batteries “C” cell The internal battery compartment accepts 4 “C” cell batteries. Be sure to use high quality brand name alkaline batteries. - Page 9 STC-TGL1 in memory and utilize the SD memory. The front counter display will show the number of images on the built in memory unless the expansion card is inserted at which point the counter will only show the number of images in the expansion card.
-
Page 10: Set Up & Using The Camera
1 / 5 / 10 / 20 minutes. 2. Select the resolution setting by sliding the resolution toggle switch to the desire resolution setting. Hi / Lo resolution. Once the program setting has been completed your Wildview scouting camera is ready for field use. www.wildviewcam.com... -
Page 11: Mounting The Camera
STC-TGL1 Mounting the camera It is recommended to mount the camera 4-5 ft off the ground with the camera pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west as the rising and setting of the sun could produce false triggers and overexposed images. - Page 12 Wrap the strap around the mounting surface. Secure the strap and tighten the buckle in order to secure the camera. Wildview scouting camera offers a Security Lock Bracket for uses exclusively with this camera. See included accessory card or call toll free 888-304-6125.
-
Page 13: Testing Coverage Area
In order to obtain proper weather resistance, please make sure that both door latches are securely locked in place. Testing the camera coverage area One of Wildview Scouting Camera’s features is the ability to test the coverage area. • After mounting the camera, open front housing and slide the power switch to Test position. - Page 14 STC-TGL1 • When you have completed the testing the coverage area open the front housing and slide the power switch from Test position to PIR position. Front LCD counter will show “0000”. The camera will enter count down mode for 1 minute and front green indicator will start blinking giving you one minute to leave the coverage area.
-
Page 15: Viewing Images
Viewing images Viewing images by computer download The Wildview Scouting Camera is a plug and play USB storage device. This means users of Windows 2000 /ME / and XP operating system need not install the camera driver. This camera is not MAC compatible. - Page 16 STC-TGL1 • If the existing DirectX version on your PC is lower than version 8, and if you have problem viewing the image with the standard software provided by Microsoft, then you should install DirectX • Restart windows. • Turn off the camera •...
- Page 17 STC-TGL1 • If your computer doesn’t run automatically, please click “Start” button and choose “Run”, and then browse the CD drive and click “Setup”. Viewing the images on your computer • Slide the power switch to OFF location. • To view the images simply plug one end of the USB cable into an available USB port on your computer.
-
Page 18: Saving And Deleting Images
STC-TGL1 Saving and Deleting images SAVING IMAGES To save images on to your PC, simply copy and past, or drag and drop from the SDRAM memory to your PC desk top. DELETING IMAGES There are two ways to delete the images from the internal SDRAM memory. - Page 19 STC-TGL1 RED LED indicator will blink when batter is low. Turn off the camera. Down load the pictures immediately. DO NOT attempt to replace the batteries before you save the images in your PC. Once the battery is drained completely, or if you attempt to replace the battery, all images in the internal SDRAM memory will be lost.
-
Page 20: Memory Compatibility Chart
STC-TGL1 SD Compatibility Chart The following cards have been tested and approved for use in the Wildview STC-TGL1 model. 32MB, 64MB, 128MB, 256MB, 512MB San Disk 32MB, 64MB, 128MB Panasonic 32MB, 64MB, 128MB, Toshiba 32MB, 64MB, 128MB, 256MB, 512MB King Mate... -
Page 21: Technical Specs
STC-TGL1 Technical Specifications System Requirements and Compatibility • Windows 98/98se/2000/Me/XP. • Pentium III 450MHz or equivalent processor. • 128MB SDRAM or above. • VGA Video Card with 32MB RAM for minimum, Color 16 bit or higher. • An available CDROM driver and an available USB Port. - Page 22 STC-TGL1 • External memory support: SD memory card up to 512MB. • Resolution Options: VGA, QXGA • Auto white balance and auto expose. • Auto Flash light strobe control. • 4 digit LCD Image counter. • Battery low indicator. •...
-
Page 23: General Information
Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers. • Remove dirt or stains with a soft cloth dampened with water or neutral detergent. Keep the Wildview scouting camera in a dry www.wildviewcam.com Toll Free 888-304-6125... - Page 24 NOT used. • Take the batteries out, when the Wildview scouting camera is NOT to be used over a long period. • Avoid dropping the Wildview scouting camera on to hard ground.