Table of Contents
Advertisement
3
1
4
6. Operation of the machine
6.1 Threading a thread
Thread the threads as it is shown in picture.
6.5 Needle replacement
2
- Turn with the hand wheel as far as the top needle (1) position
1
has been reached.
- Loosen the screw (2), (3) and remove the required needle.
- When inserting a new needle, care is to be taken that groove
(4) above the needle's eye was in the same direction as the
4
hook.
- Tighten the screw (2), (3).
10
Caution! Risk of injury!
Before threading a thread, turn the main switch
off and wait until the machine stops!
Caution!
Not following the correct method of threading a
thread may cause serious damage to the function
of the machine.
Caution! Risk of injury!
Before remowing and inserting the needle turn
the main switch off and wait until the motor
stops!
The inserted needle must respond to the sewing
category according to paragraph No. 5, table 3.
Otherwise it will cause damage to sewing, or even-
tually the machine could be broken.
Advertisement
Table of Contents
