Setting The Speed-Dependent Volume Increase (Auto Snd); Changing Display Settings; Adjusting The Display Viewing Angle (Angle) - Blaupunkt Hamburg MP68 Operating And Installation Instructions

User settings
.... Switch between the settings with the
rocker switch
<
or >
@.
- > "BEEP ON"5J: Signal tone on.
- <
"BEEP ON"
0:
Signal tone off.
.... Press the OK button
0
to select adif-
ferent function, or press the DIS-ESC
button @ to exit the menu.
Setting the speed-dependent volume
increase (AUTO SND)
When you are driving faster, the device can
automatically increase the volume to com-
pensate for the driving noise. The volume is
increased depending upon the speed. In or-
der for this to work, the speedometer signal
must be connected as described in the in-
stallation instructions.
The optimum setting for this volume in-
crease depends on how noise levels devel-
op in your particular vehicle. Try the setting
that is perfect for your vehicle. You can se-
lect avalue between OFF (no increase) and
5 (maximum increase).
.... In the System menu, press the rocker
switch
A
or
v
@
repeatedly until the
"AUTO SND" menu item is selected.
.... Press the OK button
0
to call up the
menu item.
The current setting is displayed.
.... Select the desired setting with the rock-
er switch
<
or >
@ .
.... Press the OK button
0
to select adif-
ferent function, or press the DIS-ESC
button @to exit the menu.
56
Changing display settings
The following display settings can be
changed in the System menu:
• Day/night brightness (D-DAY / D-
NIGHT)
• Adjusting the display viewing angle
(ANGLE)
• Adjusting the display color (DISP COL,
COL SCAN, CON SCAN)
Adjusting the display viewing angle
(ANGLE)
The angle at which the driver looks at the
display is dependent upon, among other
things, the installation position of the de-
vice, the seating position, and the physical
size of the driver. You can optimise the dis-
play contrast for your viewing angle:
.... In the System menu, press the rocker
switch
A
or
~
@
repeatedly until the
"ANGLE" menu item is selected.
.... Press the OK button
0
to call up the
menu item .
The current setting is displayed.
.... Use the rocker switch
<
or>
@
to
select the desired setting between -6
and +6.
.... Press the OK button 0to select adif-
ferent function, or press the DIS-ESC
button @to exit the menu.