User Settings; Opening The System Menu; Changing The Welcome Text (On Msg); Changing Time Settings - Blaupunkt Hamburg MP68 Operating And Installation Instructions

User settings
In the System menu, you can adjust these
presettings to your preferences:
• Welcome text
• Clock settings
• Volume settings
• Display settings
• Scan time
Opening the System menu
.... Press the
MENU
button
0.
.... Press the
<
rocker switch @ to open
the "Syst" system menu.
Changing the welcome text
(ON MSG)
When you switch on the device, an anima-
tion appears. It contains the factory set wel-
come text "THE ADVANTAGE IN YOUR CAR".
To change this text,
.... in the System menu, press the rocker
switch
1\
or
v
@ repeatedly until the
liON MSG" menu item is selected.
.... Press the OK button 0to call up the
menu item.
The current welcome text is displayed. The
position digit flashes and can be changed.
You can now enter your own welcome text
with up to 35 characters:
.... Enter the text by pressing the corre-
sponding buttons of the keys
0.
Select
the desired letter. if necessary by press-
ing abutton several times.
User settings
After entering one letter, the device auto-
matically switches"to the next one. To cor-
rect any entry errors, select the correspond-
ing digit by pressing the rocker switch
<
or
>@again.
After entering the complete welcome text,
.... press the OK button 0 to store the
welcome text entered.
Notes:
- To quit the text input without chang-
ing the welcome text, press the
DIS-ESC button
@ .
• If the text entry is interrupted, e.g. by
a phone call, any of the changes per-
formed so far are not stored.
Changing time settings
The following settings can be changed in the
System menu:
• Switching time display on/off
(OFF ClK)
• Selecting 12h/24h time display
(elK MODE)
• Setting the time (ClK SET)
Switching time display on/off (OFF CLK)
The time can be displayed while the de-
vice is switched off, if the vehicle ignition
is switched on. To switch this time display
on/off,
.... in the System menu, press the rocker
switch
1\
or
v
@ repeatedly until the
"OFF ClK" menu item is selected.
.... Press the OK button 0 to call up the
menu item.
53