Advertisement
Quick Links
HOW TO CONTACT CUSTOMER CARE
If you have questions after reading this manual, or if parts are damaged or missing, please contact Customer
Care at the phone numbers or addresses listed below. Please note the model number, serial number, and
name of the product (see the front cover of this manual) before contacting Customer Care. If you are
ordering replacement parts, please also note the key number and description of each part (see the PART
LIST and the EXPLODED DRAWING near the end of this manual).
In the United States and Canada
Call: 1-800-201-2109, Mon.–Fri. 8 a.m.–5 p.m. MT
Write:
FreeMotion Fitness
1500 South 1000 West
Logan, UT 84321-9813
United States
Outside the United States and Canada
Call: 001-435-786-3521
Email: intlcustomercare@freemotionfitness.com
Part No. 308203 R1210A
Printed in Taiwan © 2010 ICON IP, Inc.
Model No. FMEX81010-INT.0
Serial No.
Write the serial number in the
space above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, please
see HOW TO CONTACT
CUSTOMER CARE on the back
cover of this manual.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
USERʼS MANUAL
www.freemotionfitness.com
Advertisement
Related Manuals for Freemotion S 11.5
Summary of Contents for Freemotion S 11.5
- Page 1 In the United States and Canada Call: 1-800-201-2109, Mon.–Fri. 8 a.m.–5 p.m. MT USERʼS MANUAL Write: Model No. FMEX81010-INT.0 FreeMotion Fitness Serial No. 1500 South 1000 West Write the serial number in the Logan, UT 84321-9813 space above for reference.
-
Page 2: Warning Decal Placement
Warning decals in other languages are included. Apply the warning decals on top of the English warnings in the indicated locations if desired. Note: The decal(s) may not be shown at actual size. FREEMOTION is a registered trademark of ICON IP, Inc. - Page 3 Handlebar Post Brake Lever FreeMotion Fitness assumes no responsibility for personal injury or property damage sustained by Seat Nylon Bushing or through the use of this product.
- Page 4 The S 11.5 exercise bike pro- us. The model number and the location of the serial vides a selection of features designed to make your number decal are shown on the front cover of this workouts more effective and enjoyable.
- Page 5 NOTES ASSEMBLY Assembly requires two persons. Place all parts of the exercise bike in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench Note: If a part is not in the hardware kit, check to see if it has been preattached.
- Page 6 HOW TO ADJUST THE PEDAL STRAPS HOW TO LEVEL THE EXERCISE BIKE 3. Identify the Seat Carriage (4) assembly. Make sure that the nose of the Seat (3) is To tighten the pedal straps (see the drawing on page If the exercise bike rocks slightly on your floor during pointing straight ahead and that the Seat is 4), simply pull the ends of the pedal straps.
- Page 7 HOW TO USE THE EXERCISE BIKE 5. Using an adjustable wrench, tighten a T-knob (5) into the front of the Frame (1). HOW TO ADJUST THE ANGLE OF THE SEAT HOW TO ADJUST THE SEAT POST You can adjust the angle of the seat to the position For effective exercise, the seat should be at the that is most comfortable.
- Page 8 7. Identify the Left Pedal (75), which is marked 9. Place the exercise bike in the location where it will be used. Tip: Place a mat beneath the with an “L.” exercise bike to protect the floor. Using an adjustable wrench, firmly tighten the Left Pedal (75) counterclockwise into the Left Make sure that all four Leveling Feet (47) are in contact with the floor.