Table of Contents
Advertisement
Creating a new song
1. When the recorder is stopped, press the MENU button to
open the
screen.
MENU
2. Use the JOG/DATA dial or the CURSOR (
buttons to select (highlight green)
F4 (
) button.
t
The
screen opens.
SONG LIST
3. Press the F4 (
) button to open the menu list and then use
t
the JOG/DATA dial or the CURSOR (
.
CREATE
4. Press the F4 (
) button to open the
t
up window.
The created song is given the name
5. Change the name (title) of the song if necessary in the
item. (See "Editing names" on page 28.)
6. Use the CURSOR (
/
) buttons to move the cursor
5
b
(highlighted blue) to select
frequency), and then use the JOG/DATA dial to set it as
desired.
/
/
/
)
5
b
g
t
, and then press the
SONG
/
) buttons to select
5
b
pop-
SONG CREATE
.
SONG_0002
Name
(bit rate) or
(sampling
Bit
Hz
2 - Quick Guide
7. Press the F2 (
) button.
YES
The currently loaded song is saved and a new song is
created.
8. Press the HOME button to return to the Home screen.
Connecting and setting the input sources
1. Connect an electric guitar to the MIC/LINE INPUTS H jack
on the rear panel.
Guitar
2. Set the LINE-GUITAR switch on the rear panel to GUITAR.
The GUITAR indicator lights.
Now the guitar is the input source for INPUT H.
TIP
When connecting an electric-acoustic guitar with a built-in preamp
or an active-type electric guitar, or when using an effects pedal, for
example, between the guitar and this unit, set the LINE-GUITAR
switch to LINE on the rear panel.
GUITAR indicator
11
TASCAM DP-32SD
Advertisement
Table of Contents
