Datalogic DS8100A Reference Manual page 34

3
The table below gives the pinout of the CBX100/500 terminal block connectors. Use this
pinout when the DS8100A reader is connected by means of the CBX100/500:
Group Name
Vdc
Input Power
GND
Earth
+V
External Trigger I1A
(PS) Input
I1B
-V
+V
Encoder or I2A
Generic Input
I2B
-V
+V
-V
O1+
Outputs
O1-
O2+
O2-
O3A
O3B
+V
I3A
Other I/O
(CBX500 only)
I4A
-V
I34B
I34B
TX
Auxiliary Interface
RX
SGND
REF
ID-NET™ ID+
ID-
Network Shield
Main Interface
* Do not leave floating, see par. 3.2.2 for connection details.
Do not connect GND and SGND to different (external) ground references.
GND and SGND are internally connected through filtering circuitry which
can be permanently damaged if subjected to voltage drops over 0.8 Vdc.
CAUTION
DS8100A scanners do not support Host Interface Modules with the
CBX500. Use the CBX800 Gateway for Host Interface Applications,
(Fieldbus and non Fieldbus).
CAUTION
20
CBX100/500 Terminal Block Connectors
Function
Power Supply Input Voltage +
Power Supply Input Voltage -
Protection Earth Ground
Power Source – External Trigger
External Trigger A (polarity insensitive) for PS
External Trigger B (polarity insensitive) for PS
Power Reference – External Trigger
Power Source – Inputs
Input 2A (polarity insensitive) for Encoder
Input 2B (polarity insensitive) for Encoder
Power Reference – Inputs
Power Source – Outputs
Power Reference – Outputs
Output 1+
Output 1-
Output 2+
Output 2-
Output 3A (polarity insensitive)
Output 3B (polarity insensitive)
Power Source – Other I/O
Input 3A (polarity insensitive)
Input 4A (polarity insensitive)
Power Reference – Other I/O
Input 3B and 4B (common) (polarity insensitive)
Input 3B and 4B (common) (polarity insensitive)
Auxiliary Interface TX
Auxiliary Interface RX
Auxiliary Interface Reference
Reserved
Reserved
Reserved
Network Cable Shield
RS232
TX
RTS
RX
CTS
SGND
DS8100A REFERENCE MANUAL
RS485FD
TX+
TX-
*RX+
*RX-
SGND
RS485HD
RTX+
RTX-
SGND