Table of Contents
Advertisement
How to Use Your Pedalino
els in this example is currently set at 50.1.
To change another parameter, press the SET key [11] repeatedly to scroll
•
through the list of available parameters. You can also use the Favour-
ite switch [4] and the ADES switch [5] to scroll forwards and backwards
through the list of available parameters.
Use the + key [8] and the – key [9] to adjust the output level to, for in-
•
stance, the new value of 70.1.
1
008 Ø CryBabyWdÖ
Once you are done, press the EXIT key [12].
•
If the preset save protection is turned OFF (see below) the changes
will be stored in your PedalPro. If it is turned ON, they will be kept
only until you load a different preset.
8.4.2 Protecting PedalPro's presets (temporary adjustments)
If you do not want your on-the-fly changes permanently stored in the Pedal-
Pro's preset (say, you are only testing some adjustments to one of your stored
sounds), you can protect PedalPro's presets from changes using preset save
protection.
With the Pedalino in browse mode, press MENU key (10) until the top line
•
of the display reads 'Save preference':
8
S
av pr efer enc
•
Press the SET key [11] to access the configuration page.
Rev. 1.1 - EN EU - fw 4.10
OutLevlsØ
07 . 1
0
e
e
Pr otec t=Of
When preset save protection is switched OFF, changes you make using your
Pedalino are immediately stored within the active preset in your PedalPro
and will be available next time you load that preset.
To toggle Pedalino's preset save protection ON or OFF, use the + key [8]
•
or the – key [9].
Pr otec t=On
When preset save protection is switched ON, on-the-fly adjustments made to
a preset using your Pedalino are NOT stored within the active preset in your
PedalPro and they will be lost as soon as you load a different preset stored in
your PedalPro.
8.5
BYPASSING PEDALPRO
To fully bypass the PedalPro, press the BYPASS/MUTE pad [13] to LEVEL 1.
•
The BYPASS LED [1] will light up.
On the PedalPro, you will also see that the red BYPASS indicator light is now
on. To turn the bypass mode off, simply press the BYPASS/MUTE pad [13] to
LEVEL 1 again.
8.6
TUNER/MUTE FUNCTION
Pedalino Foot Controller allows you to access and control the high-precision
tuner included in your PedalPro. This means that all the information on the
tuning status of your guitar will be displayed on your Pedalino. Pedalino's
bright, over-sized display is ideal for the purpose.
12
f
/1 1
/1 1
Advertisement
Table of Contents
