Table of Contents
Advertisement
•
Once the set you want is shown on the top line of the display, this set has
automatically loaded.
Press the EXIT key [12] to return to browse mode or to favourite mode.
•
8.11.2 Customising the global thresholds
The different sets of thresholds can be customised to further match your
weight or playing style. One method for achieving this is to adjust the thresh-
olds of either or both the 'soft' and 'hard' sets, whereby the thresholds of all
four pads are adjusted simultaneously (global thresholds).
In browse mode or in favourite mode, press the MENU key [10] until the
•
top line of the display reads 'Pad preference' (see above).
Press the SET key [11], to go to page 1 of 3 of the 'Pad preference'
•
menu.
Force=soft
-
To adjust the global threshold levels of the 'soft' set, press the MENU key
•
[10] once to go to page 2 of 3 of the 'Pad preference' menu. To adjust
the global threshold levels of the 'hard' set, press the MENU key [10]
again to go to page 3 of 3 of the menu.
Soft level
:
ÜÜ 46
Hard level
:
ÜÜ 54
1
/3
s
2
/3
ÜÜ 55
: Ü
s
3
/3
ÜÜ 63
: Ü
These two pages show the current settings for the thresholds of the respective
sets. The thresholds are symbolised here by the number of LEDs [7] that will
light up when the threshold is reached (
first example above, the current 'soft' set has the global LEVEL 2 threshold set
at 46, while the LEVEL 3 threshold is set at 55.
To adjust the threshold(s), press the SET key [11] when on page 2 or 3 of
•
the menu. The cursor will appear under the value of the threshold for
LEVEL 2.
•
Use the + key [8] and the – key [9] to increase or decrease the value of
the global threshold and the SET key [11] to switch between the global
threshold for LEVEL 2 and LEVEL 3.
The thresholds for Level 1 have been set at an optimal default value
by VR and cannot be modified.
By decreasing the value of a threshold (e.g., from 46 to 41), less force now
needs to be applied to each of Pedalino's four pads in order to reach the
corresponding level. Likewise, increasing the threshold (e.g., from 55 to 59)
will increase the amount of force required to reach that level.
Soft level
ÜÜ 41
:
While in the pad preference menu it is possible to try out the thresh-
olds AS you are customising them (either the predefined thresholds
or those you are adjusting). Simply press pads [13], [14], [15] or
[16], and look at the force-feedback LEDs [7] to check how much
force you need to apply to activate that particular level.
When you are done with adjusting the global thresholds, press the EXIT
•
key [12] TWICE to return to browse mode or to favourite mode.
21
How to Use Your Pedalino
for LEVEL 2;
for LEVEL 3). In the
ÜÜ
ÜÜÜ
s
2
/3
ÜÜ 59
: Ü
-
8
Rev. 1.1 - EN EU - fw 4.10
Advertisement
Table of Contents
