Table of Contents
Advertisement
Ú TrTempo@ Ø
Û TrTempo@:
The last expression parameter accessed and/or adjusted will appear on the
screen. In the example shown above, it was the Tempo of the Tremolo/Pan-
ner effect.
The top line of the display shows the upper limit of its range. This corresponds
to the position of your expression pedal when fully depressed (
tom line of the display shows the lower limit of the range. This corresponds to
the position of your expression pedal when fully released (
In the example above, the expression pedal is set to sweep the tempo of the
Tremolo/Panner effect from 99.0 to 204.5 BPM (beats per minute).
The triangular arrow (
) between the parameter name and its value in-
Ø
dicates which one of the two range's limit is now active. In the example
above, it is the upper limit.
Press the ADES switch [3], located next to the top line of the display, to
•
activate the upper limit (top line of the display).
Press the Favourites switch [4], located next to the bottom line of the
•
display, to activate the lower limit of the parameter range (bottom line
of the display):
Ú TrTempo@:
Û TrTempo@ Ø
You can now adjust the active limit using the + key [8] and the – key [9] to
increase or decrease its value.
For instance, by activating the upper limit of the expression parameter range
(ADES switch [3]) and using the – key [9], it is possible to reduce the upper
limit of the Tempo range to 160.0 BPM. The range swept by a full sweep of the
expression pedal is therefore reduced to 99.0 -160.0 BPM:
20
4
. 5
09
9
. 0
Ú
). The bot-
Û
).
20
4
. 5
09
9
. 0
15
How to Use Your Pedalino
Ú TrTempo@ Ø
Û TrTempo@:
Press EXIT key [12] to return to browse mode or favourite mode once
•
you have set the ranges of the user-defined expression parameters. The
new ranges will be saved in your Pedalino and recalled every time that
parameter is used in association with the expression pedal.
1 6
. 0 0
09
. 0 9
Rev. 1.1 - EN EU - fw 4.10
8
Advertisement
Table of Contents
