Table of Contents
Advertisement
8-3. Attaching/Detaching Cable Holder
A cable holder is supplied with this product. Use the holder to organize the cables connected to the
monitor.
Attaching procedure
1.
Pass the cables through the cable holder.
2.
Shut the bottom of the cable holder.
3.
While holding the shut section, insert the cable holder into the Stand base.
Note
• The cable holder can be inserted either perpendicular or parallel to the base. Change the direction of the cable
holder according to the conditions of the cables.
Detaching procedure
1.
Shut the bottom of the cable holder.
2.
While holding the shut section, lift the cable holder upward to remove it from
the Stand base.
49
Chapter 8 Reference
Advertisement
Table of Contents
