Table of Contents
Advertisement
3-2. Switching sound source for HDMI signal input
This function allows you to switch sound source for HDMI signal input. You can select the HDMI or stereo
mini jack.
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Source" in the "Sound" menu, and press
The "Source" menu appears.
3. Select "HDMI" or "Stereo Mini Jack" with
4. Press
Note
• This function is available with HDMI signal input. However, if a DVI-HDMI adapter cable is used, the sound
source is automatically "Stereo Mini Jack" and cannot be changed.
3-3. To adjust the sound level
The input sound level can be adjusted.
The volume difference may occur depending on the kinds of input signals, since the average sound level
of the external device differs.
Adjustable range
-1 to 1
Procedure
1. Choose "Sound" in the Setting menu, and press
2. Choose "Sound Level" in the "Sound" menu, and press
The "Sound Level" menu appears.
3. Use
or
4. Press
Attention
• This function is applicable to sound from the monitor speakers and headphones.
Note
• For example, if the volume difference of PC1 and PC2 input signals becomes large, you can reduce the
volume difference between them by raising the "Sound Level" of the lower volume side.
3-4. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/CI communication (see
55)).
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "DDC/CI" in the "Monitor Settings" menu, and press
The "DDC/CI" menu appears.
3. Select "Enable" or "Disable" with
4. Press
to exit the adjustment.
for adjustment.
to exit the adjustment.
to exit the adjustment.
.
.
or
.
.
or
.
.
"Chapter 9 Glossary" (page
.
.
Chapter 3 Setting Monitor
29
Advertisement
Table of Contents
