Table of Contents
Advertisement
Quick Links
Color LCD Monitor
Setup Manual
Important:
Please read this Setup Manual, the Instruction Manual and the
Installation Manual carefully to familiarize yourself with safe and effective
usage. Please retain this manual for future reference.
• The latest manual is available for download from our web site:
http://www.eizoglobal.com
Einrichtungshandbuch
Wichtig:
Lesen Sie dieses Einrichtungshandbuch, das Anleitung sowie das
Installationshandbuch aufmerksam durch, um sich mit dem sicheren und
effizienten Gebrauch vertraut zu machen. Bewahren Sie dieses
Handbuch zum späteren Nachschlagen auf.
• Die neueste Version des Handbuchs können Sie auf unserer Website
herunterladen: http://www.eizoglobal.com
Manuel de configuration
Important :
Veuillez lire attentivement le présent manuel de configuration ainsi que le
Manuel d'instructions et le manuel d'installation afin de vous familiariser
avec une utilisation sûre et efficace. Veuillez conserver ce manuel pour
référence ultérieure.
• Le manuel le plus récent peut être téléchargé sur notre site Web:
http://www.eizoglobal.com
设置手册
重要事项 :
请仔细阅读设置手册、说明手册及安装手册，以便您能了解安全及有效的
使用方法。请保留本手册，以备日后参考。
• 您可从我们的网站上下载最新版的手册 : http://www.eizoglobal.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eizo DuraVision FDF2304W-P
Summary of Contents for Eizo DuraVision FDF2304W-P
- Page 1 Color LCD Monitor Setup Manual Important: Please read this Setup Manual, the Instruction Manual and the Installation Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. • The latest manual is available for download from our web site: http://www.eizoglobal.com Einrichtungshandbuch Wichtig:...
-
Page 2: Safety Symbols
EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation's receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice. -
Page 3: Precautions
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or... - Page 4 Otherwise, the unit may become detached, resulting in injury and/or equipment damage. If the unit falls, please ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the...
- Page 5 WARNING Handle the batteries for the remote control with care. Not doing so may result in battery explosion, liquid leakage, or burns. • Do not disassemble, heat, short-circuit, or immerse the provided batteries in water. • Install/change batteries in a correct way. •...
-
Page 6: Table Of Contents
CONTENTS PRECAUTIONS ............2 IMPORTANT .............. 2 CONTENTS ............. 5 Package Contents ..........6 Setup ..............6 ● Setup Flow ............6 ● Connect the network camera(s) ...... 7 ● Prepare the remote control ......8 ● Perform Easy Setup ........9 Reference ............. -
Page 7: Package Contents
• Monitor • Remote control • Power cord • AA batteries (2 pcs) • Setup Manual (this manual) • EIZO LCD Utility Disk (CD-ROM) • HDMI cable (HH200HS) Setup ● Setup Flow The setup flow for displaying images of network cameras on the monitor is shown below. -
Page 8: Connect The Network Camera(S)
● Connect the network camera(s) Connect the network camera and the monitor according to the following procedure. Connect the network camera to the monitor via the network hub. 1. Connect the network cable (straight cable, Cat 5e or higher) to the monitor and the LAN port of the network hub. -
Page 9: Prepare The Remote Control
● Prepare the remote control Insert batteries into the remote control. The remote control is used for operating and configuring this monitor. On the back of the remote control, press the knob to unlock, and remove the cover. Input AA batteries, and slide the cover back. Attention •... -
Page 10: Perform Easy Setup
● Perform Easy Setup Necessary settings for displaying network camera images on the monitor. Start up the network camera(s). For network camera setup, refer to the network camera’s manual. Attention • This product uses ONVIF to connect to other than Panasonic network cameras. Check if ONVIF is enabled in the settings of the camera. - Page 11 Start the Easy Setup function from the menu. If the menu is not displayed, press to display the menu. Menu Operations Display mode menu: Operate the menu with the function buttons. System setup menu / Camera control menu: • To select an item Press the buttons.
- Page 12 To enter characters • Press the number buttons ( • Press a button consecutively to change over to the character next in order. For the order of character entry, refer to the table shown below. Button Input characters (space) • To enter a new character, press . •...
- Page 13 Check that “Start” is selected and press The Easy Setup wizard starts and the date/time setup screen is displayed. Set the date and time on the monitor. 1. Select “Date/Time Display Settings” and press 2. Set the “Date Format”, “Time Format” and “Time Zone”. Select the list box of an item and press Select a setting with and press...
- Page 14 Set monitor network information. 1. Check that “IP Setting Method” is selected and press Select a setting with and press If you selected “Manual Setting”, proceed to step 2. If you selected “DHCP”, proceed to step 3. 2. Set the “IP Address”, “Subnet Mask” and “Gateway”. Select the list box of an item and press Input the respective values.
- Page 15 Automatically discover network cameras. The network camera discovery results are displayed. 1. Check that “Start” is selected and press The user authentication screen is displayed. 2. Enter the “Username” and “Password” specified in the network camera. The following values are entered as the default settings: - Username: “admin”...
- Page 16 Set the positions for displaying the network camera images. Indicates the display positions on the monitor screen. 1. Press The “After Change” list box is selected. 2. Set a network camera to a position for displaying images. Select the list box of a display position you wish to set and press Select a network camera with and press 3.
- Page 17 Close the setup screen. 1. Select “Return” and press 2. Select “Exit” and press The screen returns to the live image screen. Check that images from the network camera(s) are displayed on the monitor. (Example)
-
Page 18: Reference
Reference ● How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site (http://www.eizoglobal.com) for the corresponding optional arm (or optional stand). Attention • When attaching an arm or stand, follow the instructions of their user’s manual. •... -
Page 19: Connecting Hdmi Devices
● Connecting HDMI Devices Connect an HDMI device to this product to switch over the network camera display to the HDMI device. Connection examples HDMI device (Network video recorder etc.) HDMI cable (supplied HH200HS) Compatible Resolutions/Formats The monitor supports the following resolutions and signal format. PC Signal Vertical Scan Resolution... -
Page 20: Adjusting Screen Brightness
Adjusting screen brightness Adjust the brightness of the monitor screen by changing the brightness of the backlight (light source at the back of the LCD panel). Adjustable range 0 to 100 Procedure 1. Press on the remote control. The brightness adjustment menu is displayed. 2. -
Page 21: Specifications
● Specifications LCD Panel Type Backlight Size 58 cm (23.0 inch) (58.4 cm diagonal) Native resolution 1920 dots × 1080 lines Display size (H x V) 509.1 mm × 286.4 mm Pixel pitch 0.2652 mm Display colors 8-bit colors : 16.77 million colors Viewing angles (H / V, typical) 178˚... -
Page 22: Display Capability
● Display capability The table below shows the display capability of this product H.264 (when the “Bit rate” is set at “4096kbps”) At 1-screen display 1920 × 1080 / 30 fps At 4-screen display 1920 × 1080 / 20 fps At 8-screen display 1280 ×... - Page 24 Helmut-Grashoff-Strasse 18, 41179 Mönchengladbach, Germany Phone: +49 2161 8210210 Fax: +49 2161 8210150 中国苏州市苏州工业园区展业路 8 号中新科技工业坊 5B Phone: +86 512 6252 0100 Fax: +86 512 6252 1508 http://www.eizoglobal.com 5th Edition-March, 2016 Printed in Japan. 00N0L856E1 Copyright © 2014-2016 EIZO Corporation All rights reserved. (U.M-SUMFDF2304WIP-4)
Need help?
Do you have a question about the DuraVision FDF2304W-P and is the answer not in the manual?
Questions and answers