Table of Contents
Advertisement
2.
Prepare to use analog screen adjustment patterns.
Load the "EIZO LCD Utility Disk" to your PC, and then open the "Screen adjustment pattern files".
Note
• For details and instructions on opening the "Screen adjustment pattern files", refer to the Readme.txt file.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust flickering, screen position, and screen size automatically
Procedure
1. Display Pattern 1 in full screen on the monitor using the "Screen adjustment pattern files".
2. Choose "Screen" in the Setting menu, and press
3. Choose "Auto Screen Adjust" in the "Screen" menu, and press
4. Select "Yes" with
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
If the screen is not displayed correctly even after performing the auto adjustment, perform adjustments
according to the following procedure. If the screen is displayed correctly, go to
(page
25).
4.
Choose "Screen" from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars
Procedure
1. Choose "Clock" in the "Screen" menu, and press
The "Clock" menu appears.
2. Adjust the clock with
Press
or
slowly so as not to miss the adjustment point.
3. Press
to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "Phase" to remove
flickering or blurring.
or
, and press
or
to eliminate vertical bars.
.
.
.
Chapter 2 Adjusting Screens
.
"5. Adjusting color gradation."
23
Advertisement
Table of Contents
