Eizo DuraVision FDF2305W User Manual page 34

To set "Smart Detection"
Setting
Video
Full Screen
Procedure
1. Press
The "Smart Functions" menu appears.
2. Select "Smart Detection", and press
The "Smart Detection" menu appears.
3. Select "Video" or "Full Screen" with
4. Press
Note
• Under the following conditions, the setting for "Smart Detection" is fixed to "Full Screen".
- At analog signal input
- At interlace signal input
• "Full Screen" should be set to display animated images using the whole screen.
To set "Smart Resolution"
Adjustable range
1 - 5, Off
Procedure
1. Press
The "Smart Functions" menu appears.
2. Select "Smart Resolution" with
The "Smart Resolution" menu appears.
3. Set the correction level with
4. To complete the setting, proceed to step 7.
To continuously set "Skin Tone Enhancer" and "Text Enhancer", proceed to step 5.
5. Choose the item to correct, and press
Each setting menu appears.
6. Select "Enable" or "Disable" with
7. Press
Attention
• When "Smart Resolution" is set to "Off", "Skin Tone Enhancer" and "Text Enhancer" cannot be selected.
• "Text Enhancer" is enabled only when all the conditions below are met.
- At digital signal input
- At non-interlace signal input
- The screen is not enlarged using the Screen Size function (see
34
Chapter 4 Using Smart Function
Detects the animated images on the screen, and applies the setting only to the
detected area.
Applies the setting to the whole screen.
on the remote control.
to exit.
on the remote control.
, and press
or
to exit.
Function
.
or .
.
.
.
or .
"2-5. Screen Size Changing" (page 26)).