System Setup - Logik L19DVDB19 Instruction Manual

CUSTOMISING THE DVD FUNCTION SETTINGS

SYSTEM SETUP

1. In Stop mode, press the SETUP button.
2. Use the or button to select the System Setup,
then press the button to enter.
3. Use the or button to highlight the option (Parental
Ctrl, Password or Default), then press the
enter.
4. Use the or button to select the desired setup
option.
5. To exit the SETUP MENU and return to the normal
screen, highlight the Exit Setup Mode (
press the ENTER/OK button.
Parental Ctrl
DVDs are rated according to their content and some are equipped with a password function. The
contents allowed by parental lock level and the way a DVD is controlled may vary from disc to disc.
For example, if the disc allows, you could lockout violent scenes unsuitable for children or you could
lock out playback of the disc altogether.
You cannot play password function equipped DVDs rated higher than the level you selected
unless you cancel the parental lock function1
The parental lock levels are equivalent to the following ratings.
Level 1 : Kid Safe
Level 2 : G
Level 3 : Pg
Level 4 : Pg 13
Password
Use or button to shift and select PASSWORD, use
OK button. Enter your 4-digit security code until to OK. Press the ENTER/OK button.
If you forget the password, you can erase your current password by pressing number
button 8 on the remote four times, then press the ENTER button to confirm the setting
Default
It takes 3-5 seconds to reset the unit to the factory default.
button to
) and
Level 5 : Pg r
Level 6 : R
Level 7 : Nc 17
Level 8 : Adult
(PASSWORD : 8 8 8 8)1
GB - 24
Parental Ctrl
Password
Default
button to "Change", then press the ENTER/
1 Kid Safe
...
2 G
3 Pg
4 Pg 13
5 Pg r
6 R
7 Nc 1
8 Adult