Connecting A High Definition (Hd) Devices (Yuv) - Logik L19DVDB19 Instruction Manual

CONNECTIONS
CONNECTING A HIGH-DEFINITION (HD) DEVICES (YUV)
High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the YUV Scart adaptor to this unit, then connect component video cable and
audio cable from the other device (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (SCART
and AUDIO IN).
To operate the connected device and play the source, first press the FUNCTION button to select the
YUV/SCART mode.
YUV SCART
adaptor
(included)
To SCART
jacks
Note:
When connecting a DVD player to the television, the picture resolution is dependent upon the resolution
of both the DVD player and the TV. For best results, select the highest resolution of the DVD up to the
TV maximum of 1080i such as for Blu-ray player.
To AUDIO OUT jacks
To AUDIO
IN jacks
GB - 14
* May require a subscription for
receiving HD channels. Check
with your cable/satellite service
provider for details.
To COMPONENT
VIDEO OUT jacks