Technical Specifications - R-Tech TIG200PDC Operation Instructions Manual

The R-Tech TIG200PDC is a member of our field acclaimed family of welding products.
1 Inverter power source - more efficient to operate, provides smoother weld characteristics.
2 Pulse welding in DC Tig welding mode
3 HF Arc start - Easy arc striking and prolonged tungsten life
4 Slope up / slope down
5 Digital amp meter
6 Industrial 60% Duty cycle at 200 Amps @ 40
Recommended Processes
The R-Tech TIG200PDC is recommended for the Tig welding processes within its output capacity of 200 Amps
Equipment Limitations
The R-Tech TIG200PDC is protected from overloads beyond the output ratings and duty cycle as per machine
specifications with thermostat protection of the output coils and rectifiers.
Welding Capability - Duty Cycle
The R-Tech TIG200PDC is rated at 200 Amps at 60% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.
Model No.
Input
MMA
DC TIG
Gross Weight
Insulation
Dimensions mm
Introduction
Premium features include:-

Technical Specifications

240V AC 50/60Hz
No-load Voltage
Current Range
Rated Output Current
Duty Cycle
No-load Voltage
Current Range
Rated Output Current
Duty Cycle
Up-Slope Time
Down-Slope Time
Pulse Frequency Range
Gas Post Flow Time
Arc Starting Mode
Pulse width
4
℃
R-Tech TIG200PDC
16 KG
IP21S
425 x 195 x 310
Fuse Slow-blow 32Amp
60V - 80V
5A - 160A
160A
60%
60V - 80V
5A - 200A
200A
60%
0-5 Seconds
0-5 Seconds
0.5Hz - 25Hz
1 - 10 Seconds
High Frequency
0.1-0.9