Technical Datas - optris PI160 Operator's Manual

____________________________________________________________________________________________________________

4. Technical Datas

Factory Default Settings
The unit has the following presetting at time of delivery:
Temperature range
Emissivity
Process interface (PIF)
Interprocess Communication (IPC)
Measurement function
General Specifications
Environmental rating
Ambient temperature
Storage temperature
Relative humidity
Material (housing)
Dimensions
Weight (incl. lens)
Cable length (USB 2.0)
Vibration
Shock
1)
Installation of 20 m cable in the ground is not allowed without protection by conduits, corrugated pipes, tubes or similar. If installed
outside the cable must be protected as well (see aforementioned arrangements).
____________________________________________________________________________________________________________
-20...100 °C
1,000
inactive
inactive
Rectangle measure area
IP65 (NEMA-4)
0...50 °C
-20...70 °C
10...95 %, non condensing
aluminum, anodized
3
45 x 45 x 62 - 65 mm
3
46 x 56 x 86 - 90 mm
PI160: 195 g, PI200: 215 g, PI400 / PI450: 320 g
1 m (Standard), 5 m, 10 m, 20 m
IEC 68-2-6: 3G, 11 – 200Hz, any axis
IEC 68-2-27: 50G, 11ms, any axis
optris PI – E2011-11-A
(depending on lens)
(depending on lens)
1)
7