optris PI160 Operator's Manual page 21

____________________________________________________________________________________________________________
The process interface can be activated choosing the following options:
Analog Input (AI):
Analog Output (AO):
Digital Input (DI):
Configuration Process Interface (PIF)
Industrial Process Interface (optional)
For electrical installation, an industrial process interface
with 500 VAC isolation voltage between PI and process
RMS
is available (connection box with IP65, 5 m high temp cable
for camera connection, terminal for process integration).
[► Appendix F: PIF]
____________________________________________________________________________________________________________
Emissivity, ambient temperature, reference temperature, flag control, triggered
recording, triggered snapshots, triggered linescanner, uncommitted value
Main area temperature, internal temperature, flag status, alarm
flag control, triggered recording, triggered snapshots, triggered linescanner
optris PI – E2011-11-A
Connection box of
industrial process
interface
19