If you ordered multiple fans, be sure to keep the components of each fan together. The fans each have differently rated
components that are not interchangeable.
The fan is shipped in multiple boxes. The large box contains the main fan unit, upper yoke (with beam clips and spacers), lower yoke,
extension tube (if 3 ft or shorter) with attached safety cable, winglets, control panel, and mounting hardware. The smaller box contains
the airfoils. If the extension tube is 4 ft or longer, it will also be shipped in a separate box.
Note: Dashed lines indicate internal boxes. Drawings below are not to scale.
Main Box
Airfoil Box
1.
2. This installation guide is also packaged in the box with the hardware and airfoil retainers. If your order includes yokes and an extension tube, square
washers will also be packaged in this box. Square washers are needed only if you are mounting the fan to angle irons. The number of square
washers needed depends on the number of angle irons that will be used. Winglet hardware is packed in the winglet box. Guy wires (if ordered) are
bagged separately in the main box.
3. Fire relay not shown.
4. The extension tube is only included if ordered. If extension tube is 4 ft or longer, it will be shipped in a separate box.
5. Safety cable is attached to extension tube or packed separately if extension tube was not ordered.