Intended use Check for damaged parts This Black & Decker tool has been designed to project laser Before use, carefully check the tool for damage. Check for lines to aid in DIY applications and to detect studs covered by misalignment and seizure of moving parts, breakage of parts, wall boards.
Under extreme conditions, battery leakage may occur. Note: the laser lines will only be level if the tool is kept within When you notice liquid on the batteries, proceed as 5° from vertical. follows: - Carefully wipe the liquid off using a cloth. Avoid skin Using the spacer insert (fig.
Black & Decker office at the address Technical data indicated in this manual. Alternatively, a list of authorised LZR1 Black & Decker repair agents and full details of our after-sales Voltage service and contacts are available on the Internet at:...