FUHR multitronic 881 Installation, Operation And Maintenance Instructions page 35

10.7 Power socket radio
receiver
Designed for use with two-
pin earthed/grounded plug-
sockets. For triggering exis-
ting electrical drive units via
radio key, e.g. garage doors.
Item no. NZ80088
10.8 Plug socket radio
gong
Suitable for Schuko electric
plug sockets. Receives the
signal emitted by radio key-
pad or radio wall-mounted
switch. Also applicable for
doors in nursery schools.
Item no. NZ80122
10.9 Universal adapter
Optional extra to connect to
existing control units (e.g.
from garage door drive
units).
External power supply neces-
sary (12-24 V AC/DC).
Item no. NZ80023
10.10 Radio keys
Additional radio key with
turquoise buttons.
Item no. NZ80062
10.11 User transponder
Additional user transponder
(3 user transponders are
included in delivery of trans-
ponder reader).
Item no. NZ80104
10.12 Indicator LED for
the exterior side of
the door
Can be used optionally as
a visual indicator of the
locking status.
Item no. NZ80067
10.13 Cover for the
control unit with
sliding switch and
connection cable
Enables the manual activa-
tion of the day latch func-
tion (connection to terminals
11 + 12) or daylatch retai-
ning function (connect to ter-
minals 9 + 10).
Silver
Item no. NZSTZ0265
Stainless steel
Item no. NZSTZ0459
10.14 Contact grease
For contact areas to guaran-
tee connection between the
contact surfaces and tappet
contacts.
Item no. NZ80077
Silver
Stainless
steel
35