Zeppelin Design Labs THE PERCOLATOR Assembly Instructions Manual page 62

204
d. With the frame resting between the 3 folds, find the line that is parallel and closest to
remaining short side of the frame. Remove the frame and cut the grill cloth on each of the
long-side folds up to this new line. ONCE AGAIN, DON'T OVER CUT.
along this line.
207, 208
205
207
7. While holding the frame (black side down) onto the grill cloth, turn the assembly around and look
at the front. The edges of the grill cloth should wrap tightly around the frame, and all the lines on
the cloth should be parallel or perpendicular to the frame sides. Check the straightness of the lines
(in both directions) with your speed square and make sure the back of the grill cloth is flat against
the front of the frame.
209
62
206
208
Fold and crease
205, 206