Zeppelin Design Labs THE PERCOLATOR Assembly Instructions Manual page 45

123
125
4. With the awl, or nail and a small hammer, carefully poke a hole into the wood at the center of
each cross hairs.
126
down to the LEFT side and mark that piece as well.
a PAIR of parts, not two IDENTICAL parts.
NOTE: You don't have to use the handle provided with your kit. You can use any handle you
like, but in that case, check the hole spacing before you poke your marks in the cabinet top!
126
128
Remove the template from the right side,
130
45
124
flip it over and tape it face-
127, 128
Take care when you do this that you create
129
127
129