Zeppelin Design Labs THE PERCOLATOR Assembly Instructions Manual page 61

b. Place the frame back on the grill cloth (with the long edge against the fold) and line up one of
the short sides with one of the black lines on the grill cloth about one inch away from the edge
of the cloth. Remove the frame, and use scissors or a razor to cut the grill cloth along the
199
folded crease to the chosen black line. DO NOT OVER CUT THIS LINE.
cloth at the black line and crease it the entire width of the cloth.
199
201
c. Place the frame back on the cloth with the edges against the two folds. Now find the line on
the grill cloth (one of the threads) that is parallel and closest to the the other long side of the
frame. Remove the frame and cut the grill cloth along the short folded crease to this new
parallel line. Once again, DO NOT OVER CUT THIS LINE.
on the new parallel line the entire length of the grill cloth.
202
201
200
Fold and crease the grill cloth
202
203, 204
203
61
Fold over the grill
200