Cycles - KitchenAid Pro Line FRONT-LOADING GAS DRYER Use And Care Manual

Kitchenaid pro linetm front-loading gas dryer use&careguide
Table of Contents

Advertisement

Available languages

Available languages

Cool Down
COOL DOWN is displayed during the cool down part of the cycle.
Laundry cools for ease in handling.
Cycle Complete
CYCLE COMPLETE is displayed when a drying cycle is finished.
If the Extra Care feature is selected, EXTRA CARE will also be
displayed.
The Cycle Complete display turns off 1 hour after the end of a
drying cycle, when PAUSE/CANCEL is pressed, or when the door
is opened. If the Extra Care feature is selected, the Cycle
Complete display will remain on 1 hour after the Extra Care cycle
stops.
Extra Care
EXTRA CARE is displayed when this option is selected. This
display stays on with the Cycle Complete display. See "Additional
Features."
Check Lint Screen
The Check Lint Screen display reminds you to check the lint
screen. CHECK LINT SCREEN is displayed when the machine is
turned on. The message turns off when the lint screen is opened
and cleaned, Start is pressed, or after 5 minutes have elapsed.
Control Locked
A lock icon will be displayed in the Status window when this
option is enabled.
Indicator lights
Other indicator lights on the control panel show Cycle,
Temperature and Cycle End Tone settings selected.
The Status display shows the estimated or actual time remaining
in a cycle.
Insert Lint Screen
If the lint screen is opened while the dryer is running, the dryer
will pause and the message INSERT LINT SCREEN will be
displayed. Once the lint screen is inserted, PRESS START will be
displayed.
Insert Dry Rack
After selecting the Dry Rack cycle, if no drying rack is in the dryer,
the machine will beep three times and INSERT DRY RACK will be
displayed.
Select the drying cycle that matches the type of load you are
drying. See Automatic or Manual Preset Cycle Settings charts.
AUTOMATIC CYCLES
Automatic Cycles allow you to match the cycle to the load you
are drying. See the following "Automatic Preset Cycle Settings"
chart. Each cycle dries certain fabrics at the recommended
temperature. A sensor detects the moisture in the load and
automatically adjusts the drying time for optimal drying.
White/Cotton
Use this cycle to get High heat for cotton towels, sheets or work
clothes.
Heavy Duty
Use this cycle to get High heat for heavyweight mixed loads, as
well as bulky items including bedspreads.
Normal/Casual
Use this cycle to get Medium heat for drying sturdy fabrics such
as sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get Low heat for drying synthetic fabrics,
washable knit fabrics and no-iron finishes.
Extra Delicate
Use this cycle to get Extra Low heat to gently dry items such as
lingerie, exercise wear or sheer curtains.

Cycles

15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Khgv01rss

Table of Contents