Local Log - Arris SURFboard SBG6580 User Manual

Gateway Configuration Screen Definitions
Field
URL
Start Port
End Port
Protocol
Days
Time
Allow/Block
Enabled
Time Zone

Local Log

You can use either of the following two formats to send your firewall event log notifications:
•
Individual e-mail alerts sent out automatically each time the firewall is under attack
•
Local log stored within the gateway and displayed in table form on the Local Log page
SURFboard® SBG6580 Wireless Cable Modem Gateway • User Guide
365-095-25397-x.1
Description
Enter the web address of the Internet site that you want to
block or access.
Enter the starting port number of the range of ports for which
you want to block incoming or outgoing access.
Default port is 0.
Enter the ending port number of the range of ports for which
you want to block incoming or outgoing access.
Default port is 0.
Select TCP, UDP, or Both for the Internet protocol.
Select the days of the week that the selected user can access
the Internet.
Set the start and end time of day that the selected user can
access the Internet.
Set to allow or block Internet access for the time defined
above.
Turn ON or OFF this Parental Control restriction.
Update the related time information for your location.
Figure 55 – Firewall Local Log Screen
58